| Subject | Text |
| Well, I re-soldered the wires, but I'm guessing it doesn't matter because I popped the speaker, or c |
| I did not get the persons name, but it should be in their computer. She was typing up a case file wh |
|
|
| Need Cap Values: Mitsubishi CS-35301 36" TV | I have a Mitsubishi 36" TV with the infamous bad capacitor problem, and two capacitors on the main p |
| Thanks for the feedback. the chemical fuses that you refer to what do they look like? Resistors with |
| Replace DP53 and CP51 with NEW components. They will check ok on your multimeter but will be probabl |
| Fault on FSP212-3F01 Rev:1 power supply - Need some Voltages | Hope someone can assist? Mum's TV 'broke' a few months ago, dead PSU. She didn't want to wait for a |
| Orion Model tv1333 Squeals, Wont Power Up ... | My parts came in today from MCM. After checking the various other components, i installed the replac |
| Old TV's have often bad solder joints.
Try to gently tap on some components (special the flyback |
| Dell D1626HT Sony trinitron monitor.. needs fix please help | okay. im a micro-electronic engineer student in australia and i'm trying to fix my friends monitor. |
| I have resoldered joints in that area but nothing happens, so what components can be faulty. there i |
| Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
| [quote:b18826c1bb="plamensl"]Hi,
The situation is very much the same here (in Bulgaria) - same ne |
| I have an other problem | Hi, I'm a tech from Mexico, and I have the same carver HR895 but the secondary power supply is loos |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| Ok, good. Did you mean $18.00 as oppose to $1800? Something doesn't sound right here. You see, th |
| the problem is poer supply..........it is called smps power supply ...may be the transistor in smps |
| Channel out on old Technics | This old Technics (Panasonic SA-5170) has been running forever. Yesterday it lost power. It was the |
|
|
| [quote:5804a99472]I have an Akai CT-T21N32S which will not fire up, the red LED is illuminated on th |
| new cisco ruoter for sale | Cisco WS-SUP720-3B $10500
Cisco WS-SUP720 $8900
Cisco WS-SUP720-3BXL $12600
Cisco WS-SUP32-GE-3B |
| Need TV schematics "TOSHIBA 2151TF" | Hi all,
I just send this message because I'm searching without any success the schematics of the |
| Can't adjust red convergence APEX projection TV | I'm working on an APEX model GB5108 rear projection television. The red picture is pinched slightly |
| The excessive heat, probably from the output stages is likely due to excess current through the driv |
| That model(171V) has a 3 year manufacturer warranty, if you can't find a place local, either go to s |
| SONY SHUTDOWN PROBLEM | Dear sirs, your problem with the sony power supply is not that bad, The tech with the exp, that told |
| V700 compaq | search for "schematic diagram Daewoo CMC-710 b,the main circuits are useful, but de component number |
| Hi m8 thanks for your time
I'm not sure I understand what you mean, if you could be a little more |
| [quote:4cc44662a7="sbeck"]The power supply is probably bad and it makes 3 attempts at power up and g |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| You can convert AC to DC by using a rectifier and a power filter. The factors that depend on these t |
| [url]http://www.hifiengine.com/manual_library/arcam/sa200.shtml[/url]
1800 ohm 1 watt |